■ SM5010
/ 5011
SM5010 / 5011 spectrum analyzer is used for the early
test in the development of eclectrical products, troubleshooting
of CATV/mATV system as well as the test and trouble
diagnosis of cellular phone/paging
systems. Combined with the near field probes of Mz
530, it can detect the missing fields of radio frequency.
■ SM5011
SM5011 is equipped with a tracing signal generator,
and in the combined use of spectrum analyzer/tracing
signal genertor, it can complete the work which cannot
be done by other frequency sweep system, such as
sweep generator/network analyzer, sweep
generator/spectrum analyzer, and sweep
generator/oscilloscope, etc.
|
500
MHz와 1050 MHz 주파수 측정대역의 두 종류가 있으며 각 모델마다 트렉킹 제너레이터가
장착된 모델을 포함하여 총 네가지 모델이 있습니다.
. Frequency Range : 0.1 ~ 1000 MHz
. Output Impedance : 50 Ω
. Output Jack : BNC
. Input Capacitance : About 2 PF
. Maximum Input Level : +10 dBm
(According to Frequency Range),
DC Voltage
: 20 V
. Power Supply Voltage : +6 V DC Current : 8
mA(Probe for ,Magnetic Field), 24 mA
(Probe for Electric Field)
. Dimensions : 40 × 19 × 195 mm
|
Model |
SM5010
/ SM5011 |
SM5005
/ SM5006 |
|
Input
Frequency Response |
0.15 - 1050
MHz, 3 dB |
0.15 - 500
MHz, 3 dB |
|
Display
Accuracy of Central Frequency |
±200
kHz (Frequency Sweep Width +200 kHz) |
|
Accuracy
of Mark Frequency |
±0.1
% (frequency sweep width +100 kHz) |
|
Frequency
Display Resolution |
100
kHz (4½ bit LED Display) |
|
Frequency
Sweep Width |
0.1
MHz/div-100 kHz/div with 1, 2 and 5 Step System
and |
|
Intermediate
Frequency Bandwidth |
20
kHz and 400 kHz |
|
Video
Filter |
(When
on) 4 kHz |
|
Amplitude
Range |
-107
~ +13 dB |
|
Reference
Level |
-27
dB ~ +13 dB (10 dB for every step) ±2 dB |
|
Average
Noise Level |
-97
dB (20 kHz Intermediate Frequency Width) |
|
Display
Range of CRT Screen |
80
dB (10 dB/div) |
|
Display
Range of Vertical Display |
±2
dB (2 With Attenuator) 250 MHz Signal |
|
Input
Attenuator |
0-40
dB (4 x 10 dB Step) Error: ±1 dB / 10 dB
|
|
Maximum
Input Level |
+10
dBm, +25 V DC (Input Attenuator Set at 0 dB) |
|
+20
dBm (Input Attenuator Set at 40 dB) |
|
Frequency
Stability |
Over
150 kHz/hour |
|
Input
Jack Type |
BNC |
|
Input Impedance
|
50
Ω |
|
Power Supply
|
220
V / 110 V ; ±10 % ; 50 Hz / 60 Hz |
|
Tracing
signal generator (with SM5011 / SM5006) |
|
Input
Frequency Response |
0.15
- 1050 MHz, 3 dB |
0.15 - 500 MHz, 3 dB |
|
Output Level
Range |
-50
~ +1 dBm (4 x 10 dB) ±3 dB |
|
Output Attenuator
|
0-40
dB (4 x 10 dB Step) Error: ±1 dB / 10 dB |
|
Input Jack
Type |
BNC |
|
Input Impedance
|
50
Ω |
|
Others |
|
DC Output
|
+6
V (for Probe)
|
|
AM Demodulation
Output |
Load
Impedance ≥16 Ω |
|
